Jay Fisher - World Class Knifemaker

Quality Without Compromise

Maker's Mark:
Knife Maker's Mark for Jay Fisher Knives

New to the website? Start Here
"Amethistine" dagger, obverse side view in 440C high chromium stainless steel blade, diffusion welded copper, nickel silver fittings, sterling silver gallery wire wrap and accents, Amethyst crystal gemstone pommel, hand-carved leather sheath inlaid with black rayskin


"Taranis" counterterrorism, tactical, combat knife, obverse side view in CPMS30V high vanadium stainless tool steel blade, 304 stainless steel bolsters, Olive/Black G10 fiberglass epoxy composite laminate handle, locking kydex, aluminum, stainless steel sheath with ultimate belt loop extender and accessories
"Taranis" counterterrorism tactical, combat, rescue, survival knife with all accessories: leather sheath, locking kydex sheath, Ultimate Belt Loop Extender, Magnesium/Firesteel Firestarter, HULA with MagTac Flashlight LIMA with LED Maglite Solitaire, sternum harness plus, belt loops, clips, stainless steel hardware, SCUBA and Paracord lanyards, archival nameplate, heavy canvas embroidered bag
"Taranis" Counterterrorism Tactical Combat, CSAR, Survival Knife
  • Size: Length overall: 14.25" (36.2 cm), Blade Length: 9.0" (22.9 cm), Thickness: .245" (6.2 mm)
  • Weight: Knife: 1 lb., 7.0 oz. (652 grams), Sheath (with extender, accessory package, HULA, LIMA, Firestarter, and Maglites): 1 lb., 15 oz. (879 grams)
  • Blade: CPMS30V High Vanadium Martensitic Stainless Tool Steel, Hardened and Tempered to Rockwell C59, Media Blasted, Flat Non-reflective
  • Bolsters, Fittings: 304 Austenitic Stainless Steel, Media Blasted, Flat Non-reflective
  • Handle: Olive/Black G10 Epoxy Laminate Composite
  • Sheath 1: 9-10 oz. Leather Shoulder, Polyester
  • Sheath 2: Locking, Black Kydex, Aluminum, Stainless Steel
  • Ultimate Belt Loop Extender: Polypropylene and Polyester belt loop extender with Fine DMT diamond pad sharpener, stainless steel non-reflective snap
  • HULA: (Holder, Universal, Lamp, Articulating) Welded and machined 304 high nickel, high chromium austenitic stainless steel, 5052H32 corrosion-resistant, high strength aluminum alloy, 6AL4V titanium alloy, Maglite MagTac series flashlight
  • LIMA: (Lamp Independent Mount Assembly) Polypropylene stitched with high strength polyester, 304 stainless steel fittings and hardware with Maglite LED Solitaire and stainless retainer
  • FIREBLOCK: Magnesium/Firesteel firestarter with 304 stainless steel safety and mounting cage
  • Belt plates, loops: 5052 H32 high strength aluminum alloy, 304 stainless steel
  • Lanyards: 550 Nylon Kernmantle Rope (Paracord), Nylon, ABS plastic, neoprene
  • Knife: This is one of my toughest, most aggressive and durable knives made for counterterrorism, combat, rescue, emergency response, hazardous disaster response, and survival, fit with an extremely wear-resistant and tough stainless powder metal technology tool and die steel, CPMS30V. If you are looking for a tremendously heavy-duty and useful survival, combat, emergency response, and crisis-curing knife and accessory package, here it is, with a blade steel that has impeccable performance characteristics. This Taranis is named for the Celtic mythological god of thunder with a new design that is sure to get attention. The combination of thick high alloy steel, a large and broad blade and a powerful and protective handle, this knife is certain to be a big player in my modern combat, tactical, rescue, survival and disaster response knives. This is a big, serious, powerful knife.
    • Blade Steel: Taranis excels with what is one of the new super-steels, CPMS30V. This is a very special high alloy tool steel, made by the Crucible Particle Metallurgy (CPM) process. This process creates an unparalleled alloy mixture, as the metal is atomized and sprayed into form with no segregation of alloy components, and absolutely uniform distribution of the alloys. This also allows a higher alloy percentage than traditional steel making processes. In this particular steel, there are four significant alloys that work together to make an extremely wear-resistant steel with high toughness and corrosion resistance. First, there is carbon, at 1.45 percent, allowing significant hardening and forming of carbides. The second is chromium, and at 14 percent, it's a true stainless steel with high corrosion resistance. The third and most effective is vanadium. CPMS30V has 4% vanadium, allowing a very high concentration of vanadium carbide particles, which are extremely wear resistant. CPMS30V also has a good percentage (2%) of molybdenum, which makes this steel very tough, resistant to breakage, even at a high hardness. These four alloy elements combine to form very hard vanadium carbides and chromium carbides, particles so hard that typically a diamond is preferred to sharpen this blade effectively. This is a blade that should cut for years with little sharpening, and is considered one of the most wear resistant, highly tough stainless blades made. I made the Taranis with a wide blade, with  deep hollow grinds with plenty of spine thickness, a meaty substantial piece of geometry that will assure high durability, no matter the situation or crisis. I was determined that the blade have a strong spine, with excellent matching hollow grinds leading to a razor keen single bevel cutting edge. I included three inches of my hammerhead serrations for ripping through tough materials, combining hollow ground and chisel ground geometries for a aggressive cutting action with little hanging or snagging. For traditional edge, I made sure there is plenty, at 5 1/2 inches of standard hollow ground tanto blade in front, razor-sharp. This is a big, long, 9" blade, a blade size that bridges the gap between my tactical knives and survival beasts, boasting a shape, size, and material that can handle both. I created a two thirds-length top swage on the spine for reduced cross sectional thickness without sacrificing strength, and I fully hand-fileworked the blade and tang with a bold, deep, noticeable pattern around the curvy full tang which is tapered for balance. I media-blasted the blade to offer a non-glare finish that holds wax well, aiding in corrosion resistance and maintenance. This is an extreme use high wear resistance, highly tough, and very large stainless steel blade.
    • Bolsters: I bolstered this Taranis with my signature zero-care high nickel, high chromium 304 austenitic stainless steel bolsters, contoured and rounded for comfort of the hands, and shaped and radiused in the front face for easy cleaning. They are attached with multiple through-tang pins of 304 stainless steel, and are permanent as well as extremely corrosion resistant. This is the same steel used for stainless steel nuts, bolts, and fasteners, and the bolsters are heavy, thick, and solid, giving great balance to the knife. The rear bolster is extra large, for meaty reinforcement, and has an extra large chamfered 3/8" through-tang lanyard hole for added security when working elevated or over water or debris. The bolsters are dovetailed to create a solid, seamless union with the handle material. The bolsters cover substantial quillons; this handle design is created to offer an extremely safe grip by virtue of the large quillons preventing the hand from sliding forward onto the blade, or rearward off the butt of the handle. This is one of the most guarded and protective handle shapes I make on any knife, and the bolsters play the most important role, strengthening the quillons.
    • Handle Material: The scales for this knife are G10 fiberglass/epoxy composite, laminated in Olive Green and Black, bedded to the tang and locked under the bolster dovetails and secured with eight 1/8" 304 stainless steel pins. This is a hard, tough, and colorfast handle material, with toothy fiberglass surface that grips the hand, with no maintenance. The swell in the handle thickness creates bold eyes while the overall belly and curves of the handle creates a secure grip.
    • Balance and Feel: This is a superior, robust, weighty knife, made for the the most challenging uses, in a substantial geometry and powerful weight. The knife is comfortable in either forward or reverse grip style, and the front and rear quillons lock the hand into the handle with absolute unsurpassed security. The balance point is at the front of the forefinger location, and the thumb is comfortably drawn to the thumb rise for great control. For a 9" bladed knife, it feels reasonably light, which surprised even me.
  • Leather Sheath: I included several sheath options for this package, because I've learned that versatility is critical and a necessary function of the professional knife ensemble. I've made a heavy, tough, and solid leather sheath for the Taranis, in 9-10 oz. leather shoulder, hand-stamped in a basketweave pattern. This is made of leather that is twice as thick as most other knifemakers use. The sheath design covers the blade all the way past the front bolsters, and leaves the handle exposed for a quick unsheathing. The sheath has a high back, to protect the wearer, and the orientation is right side edge back. I made a double belt loop for several wear options, with high and low loops, double row stitched with polyester for strength and moisture and rot resistance. The sheath body and welts are also double row stitched for the ultimate in durability and strength. The sheath is dyed black, sealed throughout, with buffed edges in an acrylic water resistant satin finish. Leather is irreplaceable in extremely cold or hot environments, and where absolute silence is needed in tactical operations with no clicking when in contact against objects, people, or gear. This is as tough a sheath as possible in leather.
  • Locking Sheath: I included several sheath options for this package, because I've learned that versatility is critical and a necessary function of the professional knife ensemble. This sheath is a professional assembly, frankly, the best tactical sheath and accessory package made in the world. It's also an example of my commitment to making the finest combat tactical, and rescue knives and sheaths on the planet. It starts with double thickness (.125") kydex (methyl acrylate and polyvinylchloride), hot-formed over an aluminum welt frame of 5052 high strength corrosion resistant aluminum alloy in H32 hardness. The body and welts are secured with bead blasted and slotted 304 stainless steel Chicago screws for the ultimate in durability with no care and no glare. The sheath is one of my long-proven positively locking waterproof models, with all stainless steel locking mechanism and components for the ultimate in reliability and trustworthiness. Even the machine screws are stainless steel. The sheath can be worn in any position, even upside down when worn with the die-formed high alloy aluminum belt loops (included). The belt loops can be located in multiple positions along the welt frame and are reversible for a variety of wear options. This spacing also allows the array of my sheath accessories to mate with and locate in multiple positions along the welts, and allows the knife to be mounted to virtually any gear in any position!
  • Accessories: This knife and sheath is made complete with my ultimate accessory package. For more details and instructions for these accessories, please look over my Tactical Sheath Accessories page and look a the photos with descriptive identification text on this knife's page.
    • Ultimate Belt Loop Extender (UBLX): I included my Ultimate survival, CSAR sheath belt loop extension with outstanding and critical features and devices. The polypropylene accessory is waterproof, durable, and extremely stout, and lowers the locking knife sheath to be worn in a more traditional belt position with the knife handle at the hip. The extension is mounted with counter bored and dressed 304 stainless steel straps and stainless steel socket head cap screws attached to the existing stainless Chicago screws, and the assembly is stiffened by multiple zigzag polyester stitching to prevent the extension from folding, bending, or collapsing when the knife is extracted from the sheath. The belt loop is 2 inches wide for standard tactical belts, and has a top placement elastic bungee shock cord with snap retention to prevent the knife handle from flopping around during active movements. Even the dot snap assembly is all stainless steel and is media-blasted for non-glare. The shock cord is not for retention of the knife; this is done with the stainless steel sheath lock; it just stops the handle from flopping around during very active moments (running, climbing, crawling). At the lower back of the extension I've included a custom fit pocket for a DMT (Diamond Machining Technology) Mini-Sharp diamond-nickel abrasive hone, to bring up the cutting edge in the field with ease, even on this high alloy wear resistant blade. These are great tools that can re-sharpen or just touch up even the hardest tool steel edges, as they are surface-bonded with diamond abrasives. The pocket for this tool is situated at the sheath back and against the body, so the sharpener can not be removed unless the sheath is off the body and the industrial strength Velcro closure is open. Read more about the UBLX at this link.
    • FIREBLOCK: I've included my magnesium/firesteel fire starter assembly with this knife, a critical survival tool that can save a life in a prolonged excursion. It's made of magnesium, a metal that burns at 833-5000 degrees Fahrenheit, enough to ignite any type of flammable tinder. The ignition source is firesteel, a high carbon steel that auto-ignites (sparking) when small particles are scraped off by the knife blade swage tip. The assembly is mounted in an all stainless (304) safety and mounting cage, for tight control of the sparking area and a variety of mounting options. Read more about this critical survival accessory at this link.
    • HULA and Maglite MagTac Flashlight: Included in this professional assembly is my critical offering for field use, the HULA. The Holder, Universal, Lamp, Articulating (HULA), is my answer to a call for not just a backup lamp that I've provided on previous Ultimate Extender packages, but an actual main or key professional grade lamp and mount assembly. The lamp I included is the Maglite MagTac, one of the most sophisticated and intense flashlights made today, with three modes of operation and durable construction. The lamp is a powerhouse, with ultra bright LED technology that is dependable and tough, cranking out 310 lumens, lighting up the world 600 feet away! The low power setting allows a 17 hour battery life, using CR123 lamps, the same lamps used for many tactical accessories like night vision goggles, targeting lasers, and firearm lamps. The only thing the lamp needs is a reliable, adjustable, dependable and corrosion-proof way to mount, use, and carry it on the sheath, so I designed the HULA. This special holder will hold any flashlight that is 1" by 4.75" and also accommodates the Maglite XL-100 and XL-200 flashlights that have different programmable options. The holder's lamp frame is made of welded 5052H32 high strength corrosion-resistant aluminum alloy, for the highest durability and corrosion resistance combined with low weight This aluminum is suitable for marine (salt water) environments. The lamp is held in custom made socket with a retaining cap that is maintained in a T-slot lock by the elastic tension of replaceable shock cord straps. The T-slot lock can be negotiated even in the dark due to it's simple and clever design and construction. The lamp can be turned and operated within the holder, and can even have selected modes while still in the control of the holder. One of the best features of this assembly is my exclusive ball joint and pinch mechanism. This is a very old mechanism, dating back to 200BC, where a ball sits in a dedicated socket, and is held there by the tension of a screw. The ball joint frame, ball, tangs, screw and mounting hardware are all welded 304 high nickel, high chromium stainless steel which is bead blasted for glare reduction. This is a very tough assembly that will probably outlast the knife owner. What it offers is an articulating adjustment, aiming and positioning of the lamp, while still mounted on the knife sheath, wherever the knife sheath is mounted on the body. In the traditional belt line position, the lamp can be aimed at the ground in front of the wearer (great for hiking or movement), or aimed at any object or person in front of the wearer, while freeing the hands for a weapon, tool, rescue, medical aid, or carry. Having the HULA also eliminates the need for a headlamp, a device that has its own limitations. This new development has been highly popular with search and rescue and disaster response teams and counter terrorism teams. If the wearer needs the light in his hand, he simply pulls up on the T-slot locking cap, pulls the lamp from the socket, and replaces the cap so it won't bounce around. I've done my research, and created simply the finest flashlight accessory made in the world today, custom made to mount to my locking sheaths, the best locking sheaths made in the world today. One more important point: the bolt pattern and arrangement allows the HULA to be bolted to eight positions and 16 orientations along the welts of the sheath. Talk about flexibility! There are much more to these accessories; learn about these critical accessories on a special page on my site at this link. Mounting, care, and use instructions are posted there.
    • LIMA Emergency Lamp Backup: An important lesson I learned from my counterterrorism unit clients is the addition of the emergency backup lamp, because any electrical device can fail, and a backup can save your life. So I included my LIMA (Lamp Independent Mount Assembly) on this sheath. This is a special socket in thick and wide polypropylene stitched with polyester for durability and rot resistance, and it accommodates a LED Maglite Solitaire. This little light puts out! At 37 lumens for over an hour and a half, it can reach out 180 feet and give you enough light to get to safety, should your HULA fail, or you decide to go lightweight without it. The LIMA is secured with a 304 stainless steel strap and screws and mounts anywhere along the sheath welts where I have the critical 2.5" spacing. The retaining strap rings are also 304 stainless, and the 3/16" shock cord is easily replaceable if needed.
    • Horizontal Belt Loop Plates: Answering the call of my counterterrorism and military clients, I've included a pair of horizontal belt loop plates for this knife sheath. These bolt on either side of the sheath using included hardware, and are 5052H32 high strength corrosion resistant aluminum alloy, riveted with 304 stainless steel for permanence, durability, and light weight. They allow horizontal wear of any belt up to 1.75" wide, and the sheath runs inline with the belt.
    • Sternum Harness Plus: The sternum harness I've included is also the result of input from my counterterrorism clients. It allows the knife to be worn, handle down, angled across the sternum, on top of any other tactical gear. This harness is made of polypropylene and stitched with polyester for rot-free, high strength longevity, and the buckles and straps are ABS plastic. The harness can be donned and doffed quickly and simply and the "plus" is the additional one inch wide stabilizing strap and buckle that creates an "X" strap around the torso. I also included some handy ABS clips for other gear on the harness. Even the removable X-strap assembly has a snap that is non-glare, and made of stainless steel for zero-care and high corrosion resistance.
    • Flat strap plates (horizontal and/or vertical): These have several uses: one is to mount the knife sheath rigidly clamped to the sternum harness, with no play. They also allow the sheath to be clamped on any gear (like PALS webbing) with a solid strap security and no sliding around (like on traditional belt loops). So they clamp the sheath to your gear with all stainless steel hardware.
    • Lanyards: I've included two lanyards that can be critical and necessary for retention of your knife when working in elevated locations or in marine environments. One is a SCUBA lanyard with tension adjustment and neoprene sleeve to protect the wrist. The other is an adjustable sliding paracord type, a frequent request by my tactical combat professionals. Both lanyards can be quickly and easily attached to the knife lanyard hole through the rear bolsters and tang.
    • Tools, Hardware, Containers, Bag, Tag: I've included all the tools, hardware, and necessary components to mount all or any combination of these accessories with your gear, on your person, and all of the hardware is stainless steel in common American Standard Sizes. Included is a screw top tin for hardware storage, a waterproof container for the larger components, and a heavy canvas embroidered drawstring bag to keep it all together. Also included is an archival engraved acrylic tag detailing the components with contact information. Instructions for the individual components are also included, as well as a list of video links that explain how to set up every single one of them! This is an ultimate system, and demonstrates my commitment to actual combat, field, rescue, and counterterrorism service in my trade.
  • Learn much more about my Counterterrorism Knives at this link.
  • A tremendous professional grade knife, made of extremely tough and robust materials, with a design that is suited to the most aggressive and serious counterterrorism tactical use, while crossing over to major survival, extrication, disaster response, and emergency reaction needs. It is a complete and ultimate package of accessories and wear options built of the most durable, corrosion resistant, and strong materials available, like no other ensemble on earth. NO OTHER SOURCE offers and supplies what you see here, all custom made to mesh with your gear, your outing, your mission, and your excursion, no matter the situation and exposure. This is why I make knives for some of the top military, tactical, rescue, and counterterrorism units in the world. This is a knife that can deliver for generations, getting there, achieving the potential, and getting you back home with uncompromising strength and beauty.

Thanks, S. H.!

Please click on thumbnail knife photos
"Taranis" obverse side view in CPMS30V high vanadium tool steel blade, 304 stainless steel bolsters, and Olive/Black G10 fiberglass/epoxy compsite laminate handle with locking waterproof stainless steel, aluminum, and kydex sheath "Taranis" reverse side view. Sheath shown with ultimate belt loop extender, fireblock, Maglite LED solitiare, and all stainless steel hardware and mounting fittings "Taranis" spine edgework filework detail. Filework is deep and bold, signifying absolute hand craftsmanship, down the fully tapered tang with dovetailed bolsters to lock bedded composite to handle "Taranis" inside handle tang view. All surfaces are contoured, rounded smoothed, and finished for comfort, handle has large quillons to protect hands from razor keen blade "Taranis" obverse side handle detail. Handle is tough and zero care G10 and 304 stainless steel, secured with eight .125" thick stainless steel pins through tang. Lanyard hole is chamfered and 3/8" in diameter for easy and fast lacing. "Taranis" reverse side handle detail. Handle has a deep belly and full quillons for ultimate in security and safety of grip. This is a very comforable handle "Taranis" obverse side handle material detail. G10 is a fiberglass cloth and industrial epoxy laminate and composite, made with non-alkali glass cloth and colorfast dyed epoxy. This is harder and tougher than Micarta, a premiere handle material. "Taranis" spine filework detail. This is a bold pattern with high visual interest, and aids in grip and feel while signifying complete handmade status. "Taranis" obverse side view with leather sheath. Sheath is made of 9-10 oz. leather shoulder, hand-stamped, tooled, and hand stitche with double row polyester for high durability "Taranis" reverse side view with leather sheath. Sheath back is fully tooled, even on belt loop. Belt loop has two wear positions, and is double row stitched in polyester for high strenth and no water absorption "Taranis" point detail. Aggressive point is combat ready, piercing is aided by reduced cross sectional geometry of 2/3 length spine swage. Edge is single bevel "Taranis" tactical, combat, rescue, survival knife with all accessories: leather sheath, locking kydex sheath, Ultimate Belt Loop Extender, Magnesium/Firesteel Firestarter, HULA with MagTac Flashlight LIMA with LED Maglite Solitaire, sternum harness plus, belt loops, clips, stainless steel hardware, SCUBA and Paracord lanyards, archival nameplate, heavy canvas embroidered bag "Taranis" hammerhead serrations, maker's mark, ricasso, grind termination, and spine detail. Hammerhead serrations are a top performer; this knife has plenty of spine thickness above the grind to support the 9" long blade "Taranis" sheathed view. This is the best tactical combat, rescue, survival knife sheath made, absolutely waterproof, positively locking, and completely corrosion resistant in stainless steel, high strength aluminum, and double thickness kydex. "Taranis" sheathed view, leather sheath. Sheath is deep and protective, with enough handle for easy unsheathing and a high back to protect the wearer. "Taranis" sheath front detail. Sheath is hand-stamp tooled with basketweave pattern, double row stitched with polyester binder, sealed with acrylic satin finish, permanently dyed "Taranis" sheath belt loop detail. Belt loop has double positions for variety of wear options, all stitching is double row, all areas aer stamped, tooled, dyed, and finished with acrylic for moisture resistance "Taranis" sheath mouth view, leather sheath. High back protects wearer, sheath is deep with thick welts to protect during wear. Exposed large rear quillon aids in easy unsheathing, large 3/8" lanyard hole for security in elevated or positions over water.

To Counterterrorism Knives Page

To Tactical Combat Knives Page

To Featured Knife Pages

XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Blades My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Anatomy Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Custom Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Modern Knifemaking Technology  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Knife Patterns  
Featured Knives: Page Two Order Custom Knives  USAF Pararescue Knives Folding Knives Knife Pattern Alphabetic List My Writing
Featured Knives: Page Three Knife Sales Policy  USAF Pararescue "PJ- Light" Chef's Knives New Materials First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations Hunting Knives Factory vs. Handmade Knives Second Novel
Email Jay Fisher Custom Knife Design Fee  Khukris: Combat, Survival, Art Working Knives Six Distinctions of Fine Knives Knife Book
Contact, Locate Jay Fisher Delivery Times The Best Combat Locking Sheath Khukris Knife Styles  
FAQs My Shipping Method Grip Styles, Hand Sizing Skeletonized Knives Business of Knifemaking Videos
Current, Recent Works, Events    Tactical Knife Sheath Accessories  Serrations Jay's Internet Stats  
Client's News and Info   Military Knife Care  Knife Sheaths The 3000th Term Links
Who Is Jay Fisher?   Serrations  Knife Stands and Cases Learning About Knives  
Top 22 Reasons to Buy   Concealed Carry and Knives  Handles, Bolsters, Guards Knife Blade Testing Site Table of Contents
My Knifemaking History      Knife Handles: Gemstone Knife Embellishment  
My Family      Gemstone Alphabetic List Knife Maker's Marks  
What I Do And Don't Do      Knife Handles: Woods How to Care for Custom Knives  
CD ROM Archive      Knife Handles: Horn, Bone, Ivory Knife Making Instruction  
Publications, Publicity      Knife Handles: Manmade Materials Larger Monitors and Knife Photos  
Testimonials, Letters and Emails       Copyright and Knives  
Funny Letters and Emails, Pg. 1       440C: A Love/Hate Affair  
Funny Letters and Emails, Pg. 2       ATS-34: Chrome/Moly Tough  
Funny Letters and Emails, Pg. 3 D2: Wear Resistance King
Funny Letters and Emails, Pg. 4       O1: Oil Hardened Blued Beauty  
Funny Letters and Emails, Pg. 5       Heat Treating and
Cryogenic Processing of
Knife Blade Steels
Funny Letters and Emails, Pg. 6       Elasticity, Stiffness, Stress,
and Strain in Knife Blades
Professional Knife Consultant       Cities of the Knife  
  Knife Shop/Studio, Page 1
        Knife Shop/Studio, Page 2